Finger joint
HF generator 15 kW air cooled with furnace for preheating of finger joints
Preheat finger joints in wood at 7 kg a minute to 60 °C, with an air cooled HF-generator of 15 kW and a furnace for board ends from 20 to 130 mm.
15 kW
- Capacity
- 7 kg wood/min heated 60 °C
- Board ends
- 20 - 130 mm
- Length of electrode
- 1700 mm
- Furnace weight
- App. 120 kg
Description
The HF-generator DHA 150 has a rated output of max. 15 kW. The generator is enclosed in an aluminium cabinet. Two sides of the generator are fitted with removable panels. Controls, instruments and mains connections are placed on the front of the generator, and the HF-terminal on the opposite side. One side of the generator is fitted with three air filters. The heated air is distributed out through the roof and through the HF-terminal. The airflow through the HF-terminal decreases the condensation in the electrode system. The generator is equipped with grid control to adjust the grid current for different boards.
The furnace heats 7 kg of wood per minute to 60 °C. Board ends are 20 to 130 mm, the electrode length is 1700 mm and the furnace weighs app. 120 kg.
More applications
-
Melting furnace
Melts metal samples in the lab in one to six minutes.
-
Axe hardening
Hardens axes in five to ten seconds per cycle.
-
Band saw blades
Hardens the teeth of band saw blades from 6 to 38 mm.
-
Edge hardening
Hardens and tempers the edge of steel rules and band knives.
Describe your job
Tell us what is to be heated, how large the parts are and how many you run, and Krister Küller will take it to the workshop in Norrtälje.